Driver Support/ knowledgebase/ Fixing Blue Screen of Death for Windows 8

Fixing Blue Screen of Death for Windows 8

You have to admit that Microsoft Corporation has done a remarkable job with the Windows Operating System over the past couple of years. However, there are still a few technical issues that continue to be a nightmare.

A good example is the notorious ‘blue screen of death.’ Despite the fact that a Windows 8 crash is not as often as other predecessors, such as Windows 98, the occurrence is still likely to happen, and you need to find solutions to it when that happens.

blue screen of death

You may initially be wondering what exactly causes this problem. It’s good to keep note that the issue may not be caused by the Windows software.

How to Fix Blue Screen of Death Windows 8

It mostly happens due to defective hardware. In other words, the issue may arise mainly because of having hardware drivers that have bugs. Other than this, a minor cause may be as a result of third-party software.

Therefore, it’s important for you to have the know-how of what to do in case you come across the blue-screen.

1. Identify the BSOD Message

First and foremost, it’s important to identify the cause of the problem whenever the blue-screen error message is displayed on your screen. Ideally, the Blue Screen of Death (BSOD) message is usually simplified on Windows 8 to make it easier for you to understand.

What is of most importance is the error code that is displayed at the very bottom because that’s what you’ll need to clarify the problem and eventually fix it.

Regularly, the operating system is programmed to reboot after a BSOD Windows 8 incident. This means that you may fail to identify the message error if you don’t pay close attention to what is happening.

However, you can always trace it by accessing the dumped information on Windows. Please note that viewing the error may be quite a challenge with the tools provided by Windows.

2. Update Hardware Drivers

In most cases, the BSOD can easily occur when Windows detects the installation of new hardware. The reason for this is that the installation may not work out automatically or you may have just upgraded to Windows 8.

Therefore, what you will need to use the best hardware driver update softwareso that you can eliminate the BSOD.

The processes involved can be quite confusing and even tedious at times, and this is why it’s most advisable to seek driver support that can make your problem-solving process much faster and efficient.

The main advantage of Driver Support is that we work tirelessly to identify the bug, and successfully update your drivers to function just as if they were brand new.

Keep in mind that driver updates have proven to be an effective troubleshooting step when it comes to device manager code error. You can also contact Driver Support in case you run into any trouble during the update process.

3. System Restore and Update Installation

Alternatively, BSOD can also be solved by using the System Restore if available or even by uninstalling a recently installed software or driver that generated the error. At times a simple Windows 8 reboot can also solve the matter. Either way, here are steps that you can follow to install updates:

  • Click on Settings option ( you can also hold the windows key plus C to open up the control panel area that has the Settings icon)
  • Click to Change PC Settings
  • Select the Update and Recovery option
  • Click on Windows Update
  • Finally, select Install Updates

4. Reconfigure Boot Configuration Data (BCD)

There may be a possibility that your BCD incurred some damage over time, hence, you may need to rebuild it. Here are steps you can follow up on:

  • Look out for the original install disk and begin the boot from there
  • Click on Repair your computer
  • Click on Troubleshoot, then Command Prompt afterward
  • Key in the following commands in order and in different lines one after the other: bootrec /fixmbr, bootrec /fixboot, bootrec /scanos, bootrec /rebuildbcd
  • Key in exit and eject the installation disk from the disk tray
  • Press Enter and Restart your computer

Overall, there are several troubleshooting steps that you can follow to solve BSOD. All in all, if none seems to be working for you, then the most ideal step to take is to seek support from a qualified professional.

If you’re having trouble with the Blue Screen of Death in Windows 8 troubleshooting and believe that you may need to update missing or outdated drivers, save yourself the time and hassle of troubleshooting and get started with Driver Support.