Connecting Headphones via Bluetooth In Action Center
The buttons on Bluetooth headphones may vary depending on the brand and model name. But the basic process is pretty simple.
Step 1:
Make sure your Bluetooth pairing button on your earphones or headphones is switched on. If you’re not sure what button to press, kindly see your manual of your headphones. Some headsets will automatically pair with your PC when everything is powered up.
Step 2:
Once your headphones Bluetooth is discoverable.
If you’re Bluetooth is not turned on on your PC, then you can follow these steps;
On your taskbar, select action center > Bluetooth.
If you can’t see the Bluetooth icon on the taskbar,
Select the Start button, go to Settings > Devices > Bluetooth & other devices and turn on Bluetooth.
In action center, select Connect > the device name.
NOTE:
If you have turned on the Bluetooth through Settings, your discoverable device will appear on the Bluetooth & other devices page. You can just select your device from the list, follow any additional instructions, if there are, and you’ll be connected.
Going forward once your have set up everything, your Bluetooth device and PC will usually automatically connect anytime the two devices are in range of each other with Bluetooth turned on.
If you are having issues connecting or pairing your device with your PC, you might be experiencing a driver issue. Scan and automatically update your drivers easily with the offer below.